Name: China Vibrating Screen Box Assembly Manufacturers Suppliers Factory - Pricelist - Horbon
Brand: Horbon
SKU: 316857777

Description

Send Inquiry

Quzhou Horbon Mining Parts Co., Ltd. is one of the leading manufacturers and suppliers of vibrating screen box assembly in China. With abundant experience, we are committed to providing high quality customized service and OEM service to global clients. Welcome to buy advanced vibrating screen box assembly made in China here from our factory. Contact us for quotation.

Introduction

The screen box is the structural core of any inclined vibrating screen - it carries the screening media, absorbs continuous impact and vibration loads, and directly determines the service life and throughput stability of the whole screening unit. Horbon supplies a complete vibrating screen box assembly manufactured to OEM specifications, covering the full structural build: side plates, beams, feed hoppers, liner and tensioning plates, discharge tongue plates, lifting lugs, and all associated fastening hardware.

This page uses the 3YK2870 inclined vibrating screen (Part No. 2201200001) as a reference model to illustrate the structure and scope of supply. The same build logic - Q355 high-strength carbon steel frame with NM-series wear-resistant liners in high-wear zones - applies across Horbon's broader vibrating screen box assembly range, and components can be matched or adapted to other inclined screen models on request.

Whether you need a full replacement box, a partial rebuild, or individual structural components, Horbon manufactures to part-number or drawing match, so buyers are not limited to ordering a complete assembly when only specific wear parts need replacing.

Key Advantages

Complete structural coverage

every component of the screen box, from the two side plates down to lifting lugs and rubber pads, is manufactured in-house as a matched set, avoiding fit and tolerance mismatches common with mixed-source parts.

Durable base structure

the screen box frame is built from Q355 high-strength carbon steel, giving the structural members (side plates, beams, angle irons) the rigidity needed to resist fatigue under continuous vibration cycles.

Targeted wear protection

liner plates and tensioning plates in high-abrasion zones use NM-series wear-resistant steel, extending service intervals in the areas that see the most material contact and abrasion.

Flexible procurement

buyers can order the complete screen box assembly or individual components (e.g., liner plates, tensioning plates, beams) separately, based on actual wear condition and budget.

OEM/ODM capability

Horbon accepts original part numbers or 3D drawings for direct reproduction, and for customers without drawings, our engineering team offers reverse-engineering and re-modeling from worn samples.

Direct-factory pricing and supply

as a manufacturer (not a trading intermediary), Horbon controls production cost and lead time directly, with existing stock available for common structural components.

Applications

The vibrating screen box assembly is a wear and structural component used across mineral and aggregate processing operations, including:

Metal ore and non-metal ore screening lines
Aggregate and crushed stone production plants
Coal preparation and coal washing screening stations
Sand and gravel processing operations
Quarry and mining site material classification systems
OEM equipment manufacturers requiring matched screen box components for inclined vibrating screens

Specifications

Item	Description	Notes
Reference model	3YK2870 Inclined Vibrating Screen	Used as structural reference; component logic applies across compatible models
Reference Part No.	2201200001	Full assembly part number
Frame material	Q355 high-strength carbon steel	Structural members - side plates, beams, angle irons
Wear zone material	NM-series wear-resistant steel	Liner plates, tensioning plates
Supply format	Full assembly or individual components	Buyer may order by part or as a complete set
Customization	OEM/ODM supported	Direct drawing/part-number reproduction, or reverse engineering from sample
MOQ	From 5 pieces	Applies to individual components

Screen Box - Structural Components

Item	Part No.	Description	Qty
1	3201210001	Side Plate	2
2	3201210002	Beam	27
3	3201210003	Liner Plate	24
4	3201210004	Tensioning Plate	24
5	3201210005	Feed Hopper, Lower	2
6	3201210006	Feed Hopper, Upper	1
7	3201210007	Discharge Tongue Plate	3
8	3201210008	Plate	12
9	3201210009	Bent Plate	24
10	3201210010	Side Plate A	2
11	3201210011	Side Plate B	2
12	3201210012	Outer Plate A	1
13	3201210013	Outer Plate B	1
14	3201210014	Beam	4
15	3201210015	Inner Plate	2
16	3201210016	Angle Iron A, Upper	1
17	3201210017	Angle Iron B, Upper	1
18	3201210018	Angle Iron A, Lower	1
19	3201210019	Angle Iron B, Lower	1
20	3201210020	Lifting Lug	4
21	5303030001	Rubber	12

Screen Box - Fasteners

Rivet
Hexagonal Screw
Washer
Hexagonal Nut
Spring Washer
Screw

Exact dimensions, plate thickness, and weight vary by model. Please provide your machine model, original part number, or drawing for a precise fit confirmation.

Frequently Asked Questions

1. What is a vibrating screen box assembly, and why does it need replacement?

The screen box assembly is the structural housing of a vibrating screen - it holds the screening surface and absorbs repeated mechanical stress. Over time, wear on liner plates, loosening of fasteners, or fatigue in structural beams reduces screening efficiency and can compromise machine safety, requiring partial or full replacement.

2. Do I need to replace the entire screen box, or can I buy individual parts?

You do not need to order a complete assembly. Horbon supplies individual components - such as liner plates, tensioning plates, beams, or side plates - so you can replace only the parts showing wear, based on your inspection.

3. What material is the screen box made of?

The structural frame (side plates, beams, angle irons) is built from Q355 high-strength carbon steel for rigidity under continuous vibration loads. Areas subject to direct material contact and abrasion, such as liner plates and tensioning plates, use NM-series wear-resistant steel.

4. Is this screen box compatible with my machine if I don't have the 3YK2870 model?

The 3YK2870 is used here as a structural reference. Horbon manufactures screen box components for other inclined vibrating screen models as well - send us your part number, model designation, or drawing, and we will confirm compatibility before production.

5. How do I know which components need replacing?

A visual inspection during scheduled maintenance is the standard approach: check liner plates and tensioning plates for wear thickness, beams and side plates for cracking or deformation, and fasteners for looseness or corrosion. If you're unsure, send photos of the worn components and we can help identify the affected parts.

6. Can you produce a custom screen box if I only have a damaged sample, not a drawing?

Yes. If drawings are not available, our engineering team can reverse-engineer the component from a worn or damaged sample and re-model it into a production drawing for approval before manufacturing.

7. What is the minimum order quantity for screen box components?

The standard MOQ starts from 5 pieces per component. Full assembly orders are handled based on your specific configuration - contact us for a quote based on your required quantities.

8. What is your standard production lead time?

Standard production lead time is 15–30 days depending on order quantity and component complexity. Some structural components may be available from existing stock - check with us for current availability.

9. What quality checks are performed on the screen box components?

Production goes through raw material spectral testing, HRC hardness testing, three-coordinate dimensional inspection, and flaw detection, with third-party inspection available on request before shipment.

10. What happens if I receive a defective part?

If a quality issue is confirmed, Horbon provides free replacement for the affected components. Our team is available for technical support around the clock to help diagnose fit or quality concerns after delivery.

11. Can you add our company logo or brand marking to the components?

Yes, laser marking is available for branding on applicable components such as liner plates and structural parts, as part of our OEM service.

Get a Quote for Your Vibrating Screen Box Assembly

Whether you need a complete vibrating screen box assembly, individual structural or wear components, or a custom-engineered rebuild based on your existing machine, Horbon's engineering and production team can match your specification directly. Submit your machine model, original part number, or drawing through our inquiry form, and our team will respond with a technical fit confirmation and quotation.

Request a Quote

product-1-1