CC300 & CC300S Cone Crusher Parts

CC300 and CC300S Hydraulic Cone Crusher Spare Parts

The CC300 and CC300S hydraulic cone crushers share many parts, but not all of them. Several key parts carry different Part Nos. on the two models, so always tell us which one you run. The table below compares the main parts.

CC300 and CC300S Part Numbers Compared

Part	CC300 Part No.	CC300S Part No.
Bottom shell	3101030088	3101030088
Top shell	3101030170	3101030083
Eccentric	3101030104	3101030106
Eccentric bushing	3101030100, 3101030101 or 3101030102 (by size range)	3101030110
Hub	3101030103	3101030103
Gear and pinion set	3101030105	3101030105
Main shaft	3101030111	3101030122
Main shaft sleeve	3101030113	3101030113
Pinion shaft	3101030125	3101030125
Pinion shaft housing	3101030131	3101030131
Hydroset cylinder	3101030140	3101030140
Piston	3101030137	3101030271
Spider cap	3101030148	3101030151
Head nut	3101030114	3101030114
Feed hopper	3101030167	3101030168

Assemblies Covered

Both parts lists cover the cone crusher overall, eccentric assembly, main shaft assembly, feeder hopper assembly, damper, pinion shaft housing assembly, dust collar, wearing plates in the bottom shell, hydraulic cylinder and pulley assembly. The CC300 list adds an accumulator assembly. The CC300S list has a hydraulic buffer system instead.

Mantle and Concave

CC300 mantle: types A, B, HC and EF. Concave rings: EF, F, MF, MC, C, EC and M.
CC300S mantle: types A and B. Lower concave rings and upper concaves: MC, EC and C.

Part Nos. for each type are on the cone crusher mantle and concave page.

Eccentric Bushing

The CC300 list gives three eccentric bushing size ranges: 13+16+20+24, 24+28+32 and 32+36+40+44. The CC300S list gives one: 20+25+30+36. Details are on the cone crusher eccentric bushing page.

Before You Order

Send the crusher model (CC300 or CC300S), the serial number, the Part No. and the quantity. If your part is not in the table, send photos or a drawing, or see custom crusher spare parts.