Custom Crusher Spare Parts: OEM and Reverse Engineering
Horbon makes custom crusher spare parts in two ways. If you have a drawing or a part number, we produce to it (OEM). If you only have a worn part, we survey it, rebuild the model and issue drawings (ODM). For our general OEM and ODM service overview, see OEM & Custom Parts Service.
OEM Service
- Logo marking: we can laser mark your brand logo on parts such as bronze bushings and gears.
- Custom packing: heavy crusher parts need protection against rust and transport damage. We pack in fumigated wooden crates or iron frames, built to your requirements.
- Material control: if you need a specific alloy ratio, our laboratory and melting furnace can produce to your drawing.
- Drawings and part numbers: send an original part number or a 3D drawing and we can start production directly.
ODM Service
- Reverse engineering: if you have no drawing, send us the damaged part. We survey it, rebuild the 3D model and issue drawings.
- Working condition improvement: tell us how the part is used, for example under severe wear or high impact. We can change the design or the material to extend its service life.
- Engineering team: about 20 R&D and drawing staff. From the day we receive your requirements, the first 2D or 3D draft usually takes about 3 days. Drawings can be adjusted to your requirements.
What to Send
- A drawing or 3D model, or the original Part No.
- Or the worn part itself, with photos
- Crusher model and serial number
- Working conditions and the problem you want solved
- Quantity and delivery address
Minimum order quantity is 5 pieces. Standard production lead time is 15 to 30 days.
Parts We Customize by Machine
- Cone crusher parts: cone crusher spare parts, MHP300, CC300 and CC300S, mantle and concave, eccentric bushing
- Impact crusher parts: impact crusher spare parts, PFC1415P, VSI crusher spare parts
- Jaw crusher parts: jaw crusher spare parts
Frequently Asked Questions
Q: Do I need a drawing?
A: No. A Part No., a drawing or a worn sample is enough to start.
Q: How long do the drawings take?
A: The first 2D or 3D draft usually takes about 3 days after we receive your requirements.
Q: Can you mark my logo on the parts?
A: Yes, by laser marking, on parts such as bronze bushings and gears.
Q: Can you change the material for my working conditions?
A: Yes. Describe the conditions, such as severe wear or high impact, and we can adjust the design or material.
Related Pages
Get a Quote
To get a quote, send us:
Crusher model and serial number
Part number, description and quantity (or a drawing, or photos of the part)
Company name and delivery address
Preferred trade term: FOB or CIF
Minimum order quantity is 5 pieces. Standard production lead time is 15 to 30 days. We ship from Shanghai or Ningbo port.