Quzhou Horbon Mining Parts Co., Ltd. is one of the leading manufacturers and suppliers of vibrating screen box in China. With abundant experience, we are committed to providing high quality customized service and OEM service to global clients. Welcome to buy advanced vibrating screen box made in China here from our factory. Contact us for quotation.
Introduction
Every inclined vibrating screen relies on its screen box to carry the screening deck and withstand constant cyclical stress - this structural housing is what determines how long the machine holds up under continuous operation. Horbon manufactures vibrating screen boxes to customer drawings, original part numbers, or reverse-engineered from worn samples, giving overseas buyers a direct factory source instead of routing orders through trading intermediaries.
Using the 3YK2870 inclined vibrating screen (Part No. 2201200001) as a reference build, our standard vibrating screen box construction pairs a Q355 high-strength carbon steel frame with NM-series wear-resistant liners in the zones exposed to the heaviest material contact. This combination - structural steel for load-bearing rigidity, wear steel where abrasion actually occurs - is the same engineering logic we apply when customizing screen boxes for other inclined screen models and brands.
Because Horbon operates as a manufacturer rather than a trading company, we control the full production chain: from material selection and structural design through to final assembly, so customization requests don't add the delays typical of multi-vendor supply chains.
Key Advantages
Drawing-based or reverse-engineered production
supply us with an original part number, a 3D drawing, or simply a worn sample, and our in-house technical team (roughly 20 engineers) can reproduce or remodel the screen box accordingly, typically issuing an initial 2D/3D drawing within about 3 days of receiving requirements.
Structural design adaptation
where a customer's mining or quarry conditions involve unusually severe wear or high impact loads, our engineers can adjust the screen box's structural design or material specification to extend service life under those specific conditions
Material customization
beyond our standard Q355 frame and NM-series wear liners, buyers with specific alloy composition requirements can work with our lab and melting facilities to formulate materials to a custom ratio.
Branding and packaging customization
laser-marked logos can be applied to applicable components, and export packaging (fumigated wooden crates or steel frames) can be configured to your shipping and anti-corrosion requirements.
Component-level flexibility
the screen box is built from clearly itemized structural parts (side plates, beams, liner plates, tensioning plates, feed hoppers, and fasteners), so customization or replacement can be scoped down to a single component rather than the full assembly.
Direct factory economics
as a factory-direct manufacturer with in-stock inventory on common structural items, Horbon avoids the markup and lead-time stacking associated with trading-company sourcing.
Applications
Customized vibrating screen boxes from Horbon are supplied into:
- Metal and non-metal ore beneficiation plants
- Aggregate and crushed stone production lines
- Coal preparation and coal washing operations
- Sand and gravel screening plants
- Quarry material classification systems
- OEM equipment builders needing screen boxes engineered to their own machine specifications
- Mining operations with elevated wear or impact conditions requiring a modified structural or material design
Specifications
|
Item |
Description |
Notes |
|
Reference model |
3YK2870 Inclined Vibrating Screen |
Standard build reference |
|
Reference Part No. |
2201200001 |
Full assembly part number |
|
Frame material |
Q355 high-strength carbon steel |
Standard structural spec |
|
Wear zone material |
NM-series wear-resistant steel |
Standard liner/tensioning plate spec |
|
Custom material option |
Buyer-specified alloy ratio |
Requires lab/melting facility coordination |
|
Drawing turnaround |
~3 days |
Initial 2D/3D drawing from requirement confirmation |
|
Technical team |
~20 engineers |
In-house structural design and drafting |
|
Branding |
Laser-marked logo |
Available on applicable components |
|
Packaging options |
Fumigated wooden crate / steel frame |
Configurable to shipping requirements |
|
Supply format |
Full assembly or individual components |
Component-level ordering supported |
|
MOQ |
From 5 pieces |
Per component |
Frequently Asked Questions
Q: 1. Can Horbon build a screen box from our own drawing?
A: Yes. If you provide the original part number or a 3D drawing, we can produce directly to that specification without a separate design phase.
Q: 2. We don't have a drawing - only a worn screen box. Can you still help?
A: Yes. Send us the damaged sample and our technical team will reverse-engineer it, remodeling it into a production drawing that you can review before we begin manufacturing.
Q: 3. How long does it take to get a drawing back after we submit our requirements?
A: Our roughly 20-person technical team typically issues an initial 2D/3D drawing within about 3 days of receiving your requirements or sample.
Q: 4. Can the screen box design be changed to handle unusually harsh operating conditions?
A: Yes. If your site experiences extreme wear or high impact loads, our engineers can modify the structural design or material spec of the screen box to extend its service life under those specific conditions.
Q: 5. Can we specify a custom alloy composition instead of your standard materials?
A: Yes. Beyond the standard Q355 frame and NM-series wear liners, our lab and melting facilities support production to a custom alloy ratio if you have specific composition requirements.
Q: 6. Do you support OEM branding on the screen box components?
A: Yes, we apply laser-marked logos to applicable components as part of our OEM service.
Q: 7. Can we get custom export packaging for the screen box?
A: Yes. Given the weight and rust-sensitivity of these components, we offer fumigated wooden crate or steel frame packaging configured to your shipping and handling requirements.
Q: 8. Do we have to order the full screen box, or can we order specific parts?
A: Individual components can be ordered separately - you're not required to purchase the complete assembly if only certain parts need replacement or customization.
Q: 9. What is the minimum order quantity for a customized screen box component?
A: MOQ starts from 5 pieces per component; full custom assemblies are quoted based on your specific configuration.
Q: 10. What is the standard production lead time once the drawing is approved?
A: Standard production lead time is 15–30 days after drawing approval, depending on order quantity and complexity. Some standard structural components may be available from stock.
Request a Custom Screen Box Quote
If you have a part number, a 3D drawing, or even just a worn sample to reference, Horbon's engineering team can turn it into a manufactured vibrating screen box - matched to your machine, your operating conditions, and your material specifications. Submit your details through our inquiry form and our technical team will follow up with a drawing timeline and quotation.
Hot Tags: vibrating screen box, China vibrating screen box manufacturers, suppliers, factory
